background image

14 – Pyle Pro Mixer Owner’s Manual

R.A.#: _____________

PYLE PRO Service Center

1600 63rd Street

Brooklyn, NY 11204

You must also include the following items with your return:

 

•  A copy of your sales receipt or other proof of purchase

 •  A brief letter, indicating the problem you are experiencing with the product

 •  Include in your letter your return address, daytime phone number and R.A. number

 •  Also include a check or money order for $20.00 for return 

shipping, handling and insurance, or provide your Visa/MC number with expiration date.

Our obligation under this warranty is limited to the repair or replacement

of the defective unit when it is returned to us prepaid. This warranty will

be considered void if the unit was tampered with, improperly serviced or

subject to misuse, neglect or accidental damage.

Limited Warranty

PYLE PRO MIXERS

warranty registration card

Thank you for purchasing this PYLE
product. To activate your
warranty, please mail this card
within 10 days.

Name

Address

City, State ZIP

Model No.                                      Serial # 

(if available)

Date of Purchase

Purchased at:

 Music Products Store

Catalog Merchandiser

 Sound Contractor/Installer

Mail Order

Other

Please complete warranty card, detach and return

Specifications

PYD1919/1929/1939/1949/1959

Input Sensitivity/Impedance

Mic 1-2

Phono 1-2

Line 1-8

Output Level

Amp

Zone

Record

Frequency Response

S/N Ratio (at 1 kHz)

Mic

Phono

Line

Distortion

Mic

Phono

Line

Equalizer

Control Frequencies

Boost/Cut Range

MIC Tone Control

Treble

Mid

Bass

Talkover Attenuation

Echo Delay Time

(PYD-1929/1949)

Sampling Length

(PYD-1959)

Power Source

Dimensions, inches

   (mm)

30, 60, 120, 250, 500

1K, 2K, 4K, 8K, and 16KHz

+/- 10 dB from center

10kHz;  +10/-30dB

1 kHz;  +10/-30dB

100Hz;  +10/-30dB

-16dB

50mS-120mS

12 Seconds

120 VAC, 60Hz/230 VAC, 50 Hz

19.0 x 4.13 x 9.45

(482 x 105 x 240)

1.5 mV/600 Ohms, bal/unbal

3.0 mV/50K Ohms

150.0 mV/27K Ohms

2.0 V/10-kOhms

2.0 V/10-kOhms

150mV/10-kOhms

20Hz – 20kHz +/- 3 dB

>60 dB/1.5mV input

>70 dB/3.0mV input

>80 dB/150.0 mV input

0.20%

0.05%

0.03%

All PYLE PRO products are carefully constructed and tested before shipment.

Units purchased in the USA are warranted to be free of defects in material

and workmanship for two (2) years from the date of purchase. This warranty

is limited to the original retail purchaser of the mixer.

Should the unit fail due to factory defects in material or workmanship, your

unit will be repaired or replaced at the sole discretion of PYLE.

To obtain warranty service, you must first call our Consumer Return Hotline

at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must

appear on the outside of your package and on all paperwork relating to your

return.

When returning the unit to us for warranty service, it must be carefully

packed and shipped, prepaid, to:

pro series

PYD1919/PYD1929

 PYD1939/PYD1949

      PYD1959

www.pyleaudio.com

Summary of Contents for Mixer PYD1939









Reviews: