1. Safety Information
1.1 Warning
Self diagnosis and treatment which use measured results may be dangerous. Follow the
instructions of your physician or licensed healthcare provider.
Those who have arrhythmia, diabetes, blood circulation or apoplexy problem, please use
under the physician’s instruction.
If cuff inflation doesn’t stop, remove the cuff or power off the unit,
otherwise, it may result in
a hazardous condition.
This equipment is not suitable for the neonate, infant and who can't communicate or interact
independently.
Do not use the blood pressure monitor for any other purpose except measuring the blood
pressure of human body.
Only take measurement with the manufacturer supplied cuff or AC adapter, or else it will lead
to inaccurate results.
Do not use the blood pressure monitor when you are close proximity to strong static
electricity or electromagnetic fields, and avoid using the mobile during measurement.
Do not use in combination with a hyperbaric oxygen therapy device, or in an environment
where combustible gas may be generated.
Do not install the unit in the following locations:
- Locations subject to vibration such as ambulances and emergency helicopters.
- A location where there is gas or flame.
- A location where there is water or steam.
- A location where chemicals are stored.
- A location where the unit may easily fall.
The common arrhythmia such as atrial premature beats, premature ventricular and atrial
fibrillation will lead to inaccurate results or error.
Measurements or stores need to take into account environment variables, or else it would lead
to the inaccurate measurement.
When using or replacing the AC adapter and batteries, the operator not to touch those parts
and the patient simultaneously.
The battery has positive/negative polarity. If the battery does not connect well to the unit, do
not forcibly connect it.
Do not use Luer lock. If Luer lock connectors are used in the construction of tubing, there is a
possibility that they might be inadvertently connected to intravascular fluid systems, allowing
air to be pumped into a blood vessel.
1.2 Precaution
Do not attempt to disassemble, repair or modify the blood pressure monitor or hand cuff.
Avoid high temperature, moisture, dust and direct sunlight.
Clean the body with soft and clean wet cloth. Do not clean the unit with alcohol and other
corrosive liquids.
Do not wet or cleaning the cuff with water.
Clean the cuff with soft dry cloth after measurement.
