![PYLE Audio Vintage PTCDCS3UIP Operating Instructions Manual Download Page 17](http://html1.mh-extra.com/html/pyle-audio/vintage-ptcdcs3uip/vintage-ptcdcs3uip_operating-instructions-manual_1631549017.webp)
CARE AND MAINTENANCE
CASSETTE CARE
Two common causes of trouble experienced when using cassettes are:
1) Tape jamming-Leading to uneven speed in playback.
2) Tape entangling- the tape wraps itself around vital parts of the mechanism.
To reduce the likelihood of these problems occurring, the following precautions
should be observed:
Check that there are no loose layers of tape visible
through the cassette centre window (see Fig. 1).
Take up any loose layers, using a pencil or hexagonally
barrelled ballpoint pen, before inserting the cassette
into the machine (see Fig. 2).
If the cassette feels tight while performing operation
shown(see Fig. 2), the tape may be jamming due to
ridges formed in the winding of the tape(visible
through the centre window). These may be removed
in most cases, by fast winding of the cassette from
one end to the other and back again.
Use only well-known brands of tape. Avoid use of C-120 Cassettes.
Furthermore, do not expose cassettes to direct sunlight, dust or oil, and do not
touch the tape surfaces.
Fig.1
Fig.2
16
DELETE TRACKS FROM U DISK
Plug U Disc into USB socket.Select CD function,level hold PLAY/PAUSE to
select USB mode,press SKIP REV. or SKIP FWD. button on the unit or UP/FF
or DN/FB button on the remote control to choose the song you want to
delete.Press DELETE one time only delete 1 track.
CASSETTE RECORDING
Set the function selector(AM/FM/PH/CD/USB/TA) to TA position.
Plug U Disk into USB socket. Place the record on the turntable center and
play the record. Press RECORD button twice to enter into record mode. The
player will re-start play the first point of the track to be selected. ‘rEC’ will be
shown on the display and ‘rEC’ indicator remain flash. The recording will be
from the first to the end of the phono record.
1)
2)
3)
4)Press STOP button once will stop RECORD mode, and ‘rEC’ indicator goes
‘Off ’. ‘PHO’ will be shown on the display and phono record will continue to
playback.
Rotate the OFF/VOLUME control clockwise until a ‘click’ is heard, and set
the Volume to a low level.
,
,