Installation
Battery Charging:
The unit incorporated a built-in rechargeable battery. A battery compartment located at bottom
of the unit.
(1) Unscrew the Bottom cap counter-clockwise and open it.
(2) Connect the micro USB plug of the USB cable to the micro USB connector of the unit.
Red indicator lights up when charging the unit, light turns off when it’s full charged.
Note:
Battery Life: 4 Hours (Charge Time: 8 Hours)
Please use standard DC 5V 1000mA adapter and supplied USB cable to charge. Or, connect
USB cable to computer to charge. If the adapter power rating is too small, it may cause the unit
not to be fully charged or have short battery running time.
Warnings:
- Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Be sure that the battery is installed correctly. Wrong polarity may damage the unit.
- Only battery of the same or equivalent type as recommend are to be used.
- If the unit is not to be used for an extended period of time, remove the battery.
- Do not dispose of battery in fire, battery may explode or leak.
- Danger of explosion if battery is incorrectly replaced.
Caution:
This set-up is for charging the rechargeable battery of the Speaker only.
Do not operate the Speaker with this set-up near Water and Moisture environment.
Bluetooth Operation
Bluetooth pairing/connection :
1. Slide the Power switch to ON position.
2. Press and hold the Standby button until a short melody sounds.
3. The unit will search nearby Bluetooth device and the Blue LED indicator will blink.
From the Android smart phone or Apple device (iPad/iPhone/iPod touch), turn on its Blue-
tooth function. Search for the device name (
PWR90D
) on Android smart phone or Apple
device, select, pair and connect. The blue LED indicator of the unit lights steadily.
When the unit is turned on from standby mode, it will automatically search and connect the
device last connected, no need to re-scan and pair.
Note:
Standby mode
----- Blue LED lights off.
Searching last connected mobile device ----- Blue LED blinks slowly.
Searching other mobile device
----- Blue LED blinks fast.
Bluetooth mobile device connected
----- Blue LED lights steadily.
Playback Apple device (iPad/iPhone/iPod touch) or Android smart phone music :
4. Playback your Apple device or Android smart phone music.
5. You may adjust both the volume control of your mobile device and the volume control of this
unit to find the most desirable volume setting.
6. (a) You may tap the / button from the mobile device or press the button from the
main unit to Play / Pause the mobile device music.
(b) Press the / button from the unit to skip tracks forward / backward.
7. After listening the music, press and hold the Standby button which turns the unit into
standby mode.
Energy Saving Note :
In Bluetooth mode, if the Bluetooth communication link disconnected (the main unit) for
around 5 minutes, the unit will turn into standby mode automatically.
