The PX816-T device is powered directly from 230V power grid. Failure to
comply with the safety rules may result in electric shock and may endanger
the user’s life. Therefore it is necessary to observe the following:
1. Installation should be performed by a person holding the appropriate
qualifications, according to the instruction manual.
2. The electrical installation to which the lamp is to be connected must
meet the safety requirements (the installation must be 3-wire and
equipped with a residual current device).
3. All the conductors should be protected against mechanical and
thermal damage.
4. In the event of damaging any conductor, it should be replaced with
a conductor of the same technical data.
5. All repairs, should be made with cut off power supply.
6. Do not connect to the power supply to device with visible damage.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be used in places with temperature lower than +2°C
or higher than +40°C.
9. Clear with damp cloth only.
5