PXM PX760, User Manual

Page: 14 / 26

[OUTPUT CHANNELS] – defines the number of channels sent out through a
given port
Settings:
[AUTO]: the number of channels in a port is equal to the number of
channels received by the Art-Net protocol. You can force transmission
of the selected number of channels within the range: 0 – 512
[NET SWITCH] – setting a network value in the Art-Net protocol. It is a
common setting for all the ports. The range is 0 – 127 (0x00 – 0x7A)
[SUBNET SWITCH] – setting a sub-network value in the Art-Net protocol. It is a
common setting for all the ports. The range is 0 – 15 (0x0 – 0xF)
[STOP DMX SIGNAL]
• [On]: turns off DMX transmission if Art-Net signal is lost
• [OFF]: the ports continue to transmit the last values
[TIMEOUT VALUE] – a value in seconds after which transmission through a
DMX port is stopped following Art-Net signal loss
5.6 Presets menu
In the gate are predefined 2 standard sets of factory settings:
2.x.x.x and 10.x.x.x.
14
PX760 G2 DMX RDM
*192.168.1.14
ENTER
PRESETS
->
3 x NEXT
ENTER
DEF 1 (2.x.x.x)
|||
DEF 1 (2.x.x.x)
LOAD THIS PRESET
NEXT
ENTER
DEF 2 (10.x.x.x)
|||
DEF 2 (10.x.x.x)
LOAD THIS PRESET
ENTER