2
Safety conditions
PX723 is a device powered with safe voltage 12 – 24V DC, however,
during its installation and use the following rules must be strictly observed:
1. The device can be connected to 12 – 24V DC with current-carrying
capacity compatible with technical data.
2. All the conductors should be protected against mechanical
and thermal damage.
3. In case of damage to a conductor, it should be replaced with
a conductor of the same technical parameters.
4. Connection of DMX signal can be made with a shielded conductor
only.
5. All repairs, connecting and disconnecting of cables can only be made
with cut off power supply.
6. The device should be strictly protected against contact with water
and other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be turned on in places with humidity exceeding
90%.
9. The device cannot be used in places with temperature lower than +2°C
or higher than +40°C.
10. Clean with damp cloth only.
4