the absence of a DHCP server on the network the controller will operate
according to the static configuration (manual setup).
When choosing static addressing, the network parameters configure
should be in such a way that the controller is able to operate on the subnet
and there is no conflict of IP addresses (devices in the network must have
unique IP addresses).
The default network settings of the controller:
•
DHCP: On
•
IP: 192.168.0.50
•
Mask: 255.255.255.0
•
Gate: 192.168.0.1
If the controller operate in automatic mode in the network and receive IP
address from the DHCP server, the detaching of the network cable will result
in the loss of IP address and another attempt to get new IP address from the
DHCP server. If that fails, the controller switches to operate with a static
configuration.
It is recommended to use automatic addressing and connect the
controller to the network with a running DHCP server.
Should the controller be connected directly to the computer (no DHCP
server), the network parameters must be manually set of both the computer
and the controller to operate in one network.
17
