2
Safety conditions
The PX348 device is powered directly from standard 230V AC grid what
can cause electric shock when safety rules are not observed.
Therefore it is necessary to observe the following:
1. Installation, particularly power connection, should be performed by a
person holding the appropriate qualifications, according to instruction
manual.
2. The electrical installation to which the lamp is to be connected must
meet the safety requirements (the installation must be 3-wire and
provided with a residual current device).
3. All the conductors should be protected against mechanical and
thermal damage.
4. In the event of damaging any conductor, it should be replaced with a
conductor of the same technical data.
5. All repairs, should be made with cut off power supply.
6. Device with visible mechanical damage cannot be connected to the
mains.
7. The device should be strictly protected against water and other
liquids.
8. All sudden shocks, particularly dropping, should be avoided.
9. The device cannot be used in places with temperature lower than 2°C
or higher than 40°C.
10. The device cannot be turned on in places with humidity exceeding
90%.
4
