1.Break Time
allows to change the length of the interval between successive DMX
packets. Break signal may take longer, but can not be less than 120 microseconds.
Usually it lasts about 120-140 microseconds.
2. MAB Time
(Mark after break) is the interval time that occurs in each package
according to the standard DMX-512. The PX235 allows minimum value of 16
microseconds.
3. MBF
(Mark Between Frame) -
frame (end of the 2nd stop bit) and the start of the next - Mark Time Between Frames
(MTBF) is the full name. Its length can range from 0 to 1000 microseconds, the shorter
the better.
4. Packet gap
- the amount of time between packets. Its length can range from 16 to
5000 microseconds.
5. Channels number
- Using this feature, you can limit the number of channels sent
from the PX235. The minimum value is 24 channels and the maximum is 512 (default).
the amount of time (if any)between the end of one
5
At the top of the screen next to
the option name are visible
important information that
simplify setting an appropriate
value.
To save the value before
leaving level up in menu You
need to select floppy disc
button and press
.
enter
Remember to save values by
selecting the button
and pressing
enter
