2
Safety conditions
PX165 Splitter DMX is a device powered with safe voltage 12 – 24V DC,
however, during its installation and use the following rules must be strictly
observed:
1. The device may only be connected to 12 – 24V DC with current-
carrying capacity compatible with technical data.
2. All the conductors should be protected against mechanical
and thermal damage.
3. In the event of damaging any conductor, it should be replaced
with a conductor of the same technical data.
4. Connection of DMX signal can be made with shielded conductor.
5. All repairs and connections of outputs or DMX signal can only be
made with cut off power supply.
6. PX165 should be strictly protected against contact with water
and other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device with damaged (cracked) casing cannot be connected
to the mains.
9. The device cannot be turned on in places with humidity exceeding
90%.
10. The device cannot be used in places with temperature lower than +2°C
or higher than +40°C.
11. Clean with damp duster only.
4