PXM PX163+, User Manual

Page: 5 / 30

The housing has been adapted for wall mounting, and the screw
connectors allow quick and easy installation.
2 Safety conditions
Driver LED C.V. 48 x 700mA is a device powered with safe voltage 12 –
24V DC; however, during its installation and use the following rules must be
strictly observed:
1. Installation of equipment, in particular, power connection should be
made by a licensed person, in accordance with this manual.
2. The device may only be connected to DC current (stabilized voltage)
with current-carrying capacity compatible with technical data.
3. Product is designated only indoor usage. In case of any outdoor usage
it should be protected against any weather conditions.
4. All the conductors should be protected against mechanical and
thermal damage.
5. In the event of any conductor damaging, it should be replaced with the
one of the same technical specification.
6. All repairs can only be made with power off.
7. Do not connect the device to the power supply with visible damage.
8. PX163+ should be strictly protected against contact with water and
other liquids.
9. All sudden shocks – particularly dropping – should be avoided.
10. The device cannot be turned on in places with humidity exceeding
90%.
5