PXM PX163+, User Manual

Page: 19 / 30

5.13 Default settings
The device was equipped with the possibility to restore the default values
and they can be restored in two ways:
•
using the command dEF (situated in the menu tree)
• while turning the device on (using the key “ previous ”)
In order to make use of this option,
disconnect the PX163+ from the mains supply.
Before reconnecting it to the mains supply, the
key “ previous ” should be pressed and held. Then, after switching on the
message dFI will appear on the screen of the device(while turning the power
supply on to the moment of displaying the message dFI the key “ previous ”
must be held down). When the dFI message is displayed, selecting the “ enter ”
button will restore the factory settings, while pressing “ esc ” will return to
normal operation of the device without restoring the settings.
19
ENTER
ENTER
9 x NEXT
Pressed
ENTER
ENTER
ESC
Pressed
PREV