PXM PX156, User Manual, Page: 12 / 33

6. noS – precise the dimmer reaction to DMX signal interruption. There
are 11 options to choose from:
◦
On – turning all outputs on at 100%
◦ OFF – turning all outputs off
◦
HLd – the last received value is held
◦
– slow output switching off (about 20 seconds)
◦ Sc1 … Sc4 – programmable scenes
◦
CrF – built-in chaser
◦ CrP – user-defined chaser
◦
AnL – analog mode activation in the absence of DMX (e.g. it
allows to control using the connected external momentary
buttons)
6.1.2 Individual parameters
1. Adr – DMX address from the range 1 to 512
2. Cur – characteristic, there are 9 options to choose from:
◦ Lin – linear
◦ SP – switchable
◦
Inu – inverted
◦ LnU – logarithmic
◦
E_P – exponential
◦ nE1 … nE3 – for neon lamps control *
◦
Li2 – linear 15 – 100% (zero value at the power output for DMX
values of 0 – 15%)
3. ACL – limits the output voltage in the range from 50 – 230V
12