Channel 3: reproduction mode - single (the selected track is played once), single looped
(the selected track is played repeatedly), continuous single (starting from
the selected track, playing comes to the last track and stops when the last
track was played), continuous looped (starting from the selected track,
tracks are played in turn, after the last track was, the player starts to play the
first track, and so on)
DMX values:
0 - 63
- single reproduction
64 - 127
- looped single reproduction
128 - 191
- continuous single reproduction
192 - 255
- looped continuous reproduction
ATTENTION: each change of playing mode through the DMX protocol auto-
matically selects the track and realizes the start / stop command
Channel 4: 32-grades volume adjustment
Channels 5, 6, 7: tone equalizer - in sequence: low tones, medium and high (32 grades
each)
4
DMX values
volume level
equalizer level
0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
8
DMX values
volume level
equalizer level
128-135 136-143 144-151 152-159 160-167 168-175 176-183 184-191
23
22
21
20
19
18
17
16
17
18
19
20
21
22
23
24
DMX values
volume level
equalizer level
192-199 200-207 208-215 216-223 224-231 232-239 240-247 248-255
31
30
29
28
27
26
25
24
25
26
27
28
29
30
31
32
DMX values
equalizer level
64-71
72-79
80-87
88-95
96-103 104-111 112-119 120-127
15
14
13
12
11
10
9
8
9
10
11
12
13
14
15
16
volume level
To enter the player main menu press both volume adjustment (VOLUME + and -) keys
simultaneously. Moving around the menu and options selection is performed with the following
keys:
VOLUME "+" - ENTER (enters the successive submenu and confirms your selection)
VOLUME "-" - ESCAPE (returns to the previous menu and discards changes made)
NEXT - scrolls the menu forwards and increases the parameters values
PREV - scrolls the menu backwards and decreases the parameters values
8. PLAYER MENU
The player menu allows to define the parameters of a played track, set the player reaction to DMX
signal interruption, choose the control mode (number of DMX control bytes) and to set the DMX
address. When the programming is performed, the tracks reproduction is not interrupted (the only
exception is the dEF menu parameters programming).