5. FRONT PANEL VIEW
Display
Power switch
DMX sockets
Programming buttons
The described DMX route couplings (input plug and output socket). With these sockets the
demultiplexer can be incorporated to the DMX installation. You must remember to connect the
terminator on the output, if the demultiplexer is the last device in a DMX chain.
DMX SOCKETS
3
Control buttons
DMX signal presence indicator
The indicator twinkles, when the transmission is correct. When the indicator is off, the DMX
signal is absent or its parameters are incorrect.
DMX SIGNAL PRESENCE INDICATOR
OFF and FULL control buttons are for checking the receivers connected to the demultiplexer.
Regardless of the input DMX transmission status these buttons force adequately turning all the
outputs off (OFF button) or control with full power (FULL button). Use of the control buttons
facilitates for instance locating the used bulbs in the executory devices.
CONTROL BUTTONS
DISPLAY
During the standard operation mode displays the first channel's DMX address. During
programming displays the currently programmed parameter.
PROGRAMMING BUTTONS
Four buttons for demultiplexer's parameters programming:
ENTER - enters the menu and confirms the defined values
NEXT
- scrolls the menu forwards or increases the programmed values
PREV
- scrolls the menu backwards or decreases the programmed values
CANCEL - returns to the previous menu and discards the changes made
PUSH
DMX
demultiplexer
PX106
128 CHANNEL
DMX
INPUT
CANCEL
PREV
NEXT
ENTER
DMX
OUTPUT
DMX OK
OFF
ON
SETTINGS
OUTPUT CONTROL
FULL
OFF
DISPLAY
