PXM Gate 2 DMX RDM PoE, User Manual

Page: 21 / 31

The PX760 gate should be connected to the console via an Ethernet cable
to the [ETHERCON 2 (ETH1)] connector with the IP address set so that
the console is in the same network as the gate. If Gate 2 DMX RDM is on the
2.x.x.x network with the mask of 255.0.0.0, then for the device to work
together, the console must be on the same network. These settings can be
changed in the console by going to the Setup Network MA Network
→ →
Configuration.
21