2. Connect Power
Remove the Malevolent from its packaging and set it down on a nice flat surface.
Remove the Power supply from its box – you will find it inside of one of the foam end
pieces in the box. Have a look through the included interchangeable heads and select
the correct one for your country. Carefully clip this on.
Make sure the Malevolent is switched off.
Connect the small end of the wire to the power socket on the back of the Malevolent
and plug the Power Supply in to an available mains socket.
Switch on Malevolent and you will see some of the LEDs light up. The LFO LED will be
flashing.
Note: Malevolent can be bus-powered from USB if that is more convenient. We
recommend using the Power Supply first time though to make sure everything is
working correctly.
5