5.
Connect the receivers to the televisions and the network, THEN turn it on, so it can acquire the DHCP.
6.
Set each Receiver ID to a different number.
The Receiver ID is the unique identifier of each Receiver over the network, and this number will be used to
recognize each Receiver on the control software, while the Receiver channel might change from time to time.
7.
Select the RECEIVER CHANNEL NUMBER to match the wanted TRANSMITTER CHANNEL NUMBER you want to
watch by either the panel button or the IR Remote control
CONTROL VIA COMPUTER:
1.
Copy the PVI VUMATRIX CONTROL Software to your computer
2.
Make sure the computer is connected either to the wifi or lan of the same network/dhcp where the VuMATRIX
units are installed, or it will not be able to talk to them.
3.
Run The PVI VUMATRIX CONTROL SOFTWARE
4.
Press START SCAN, so the transmitters and receivers will be shown
5.
You can identify the transmitters ( list on the left ) through the DEVICE ID number, SAME as you set on each
transmitter/location
6.
You can identify the receivers ( list on the right ) through the DEVICE ID number, SAME as you set on each
receiver/location
7.
The NAME filed shows the actual MAC ADDRESS of each device. Double click on the name of each device to
assign an ALIAS NAME
As example the name of the connected sources to each transmitter ( bluray 1 / apple tv 1 / security cam 1 etc.. )
or the TV/ROOM name for the receivers ( LOBBY TV1 / MEETING ROOM 1 / ROOM 1 etc.. )
8.
To change channel on the Receiver, click on the CHANNEL and select the wanted channel from the list
When done click UPDATE
9.
By switching to the PRESET TAB, it is possible to create preset combinations and save them with the wanted
name, then recall them in a click by selecting from the preset selector on the bottom right and clicking APPLY
CONTROL VIA API:
To control via API please open a ticket on pvisupport.com requesting the API LIBRARY For your VuMATRIX 1K IP PRO
