background image

 
 
 
 
 
 

SPECIFICATION FOR DOMESTIC WATER HEATERS 

Condensing Gas Water Heater with Stainless Steel Tank 

 

PV 6813 5/07 

 

 
 

Safety Controls 

 
 

The heater will be equipped with the following: 

 

electronic flame monitoring with pre-purge 

 

electronic temperature control with digital temperature readout  

 two

 

immersion temperature limiting devices 

 

an ASME and AGA-rated temperature and pressure relief valve 

 

and options as selected on standard and optional equipment document  PV 6811 

 

 

Warranty Summary 

 
 

 
Storage tank will be covered by a seven-year warranty covering manufacturing or material defects, leaks and /or the 

production of rusty water. Tank coverage will include failure due to scale buildup with no provision or condition for 
maintenance or inspections and no limitations on water chemistry.  
 
 

Heat exchanger and combustion chamber will be covered by a five-year warranty covering manufacturing or material 

defects, leaks, and/or the production of rusty water.   
 
 

Burner and all heater parts will be covered by a one-year warranty.  

 
 

Initiation and /or continuation of warranty coverage will not be dependent upon annual inspections, regular 

replacement of anode rods, or water chemistry. 
 
 

The entire heater will have a first year service policy, which will cover replacement labor and freight costs under 

certain conditions. Complete copies of all warranties and service policies; including all exclusions and conditions, will be 
presented to the owner as part of the submittal package. 

 

 

Finishing 

 
 

The storage and heating sections will be completely factory packaged, requiring only job site hookup to utilities, 

venting, and plumbing.  The heater will be insulated, jacketed with a corrosion-resistant polyethylene jacket, and 
mounted on heavy-duty channel skids.  The heater will fit properly in the space provided and installation will conform to 
all local, state, and national codes. UL listing will allow alcove installation and one-inch clearance from combustible 
materials. 

 
 

Start Up 

 

 

Start up on the unit will be performed by factory trained and authorized personnel.  A copy of the start up report will 

be provided to the owner. 

 

 

Quality Certification and Safety Standards 

 
 

The heater will have an independent test laboratory listing to safety standard ANSI Z21.10.3/ CSA 4.3.  The water 

heaters will be manufactured by a company that has achieved certification to the ISO 9001 International Quality System.

 

Reviews: