Pro Video instruments
VeCaster Pro Series H264/H265 Encoder
2
POWERING THE DEVICE. – QUICK GUDIE
a)
Connect your included Power adapter the unit.
b)
Once the unit is powered on insert a valid HDMI Video Signal into the HDMI port > The On-air LED on the
back will start blinking
c)
Set your computer to a static IP as 192.168.1.100 ( see below on how to set your local static IP connection)
d)
Connect your PC ETHERNET PORT to the VECASTER ETHERNET PORT using a patch cord
e)
Run VLC VideoLan video playback software ( www.videolan.org ) On VLC > MEDIA > OPEN NETWORK
STREAM > http://192.168.1.168/0.ts
f)
You should now see the video playing on VLC
NOTE: If the above is not working, please check all connections, Network Settings, and ensure your video source
is working. You could also try with another pc, or reset the VeCASTER unit by pressing the Reset button for 10
seconds on the rear panel of the unit
MANUALS & TECH SUPPORT
Latest Manuals & Software are always available on our specific website www.quickinstallnow.com to access,
use the 3 letters the UPC number on the serial number label on the product. You can also scan the QR
Code on the label to access directly.
Free Unlimited Tech support over the phone is always available Mon-Fri 9 am / 4 pm EST US.
For troubleshooting or questions please open a Ticket on our site pvisupport.com
Your Satisfaction is top priority and most important for us.
