
RD100 & RD200 PVA
Revision A (2016)
31 of 35
Fault Recovery
If the machine encounters a system error, this procedure should be followed to return
the machine to the home screen.
WARNING: If the power was turned off because of system failure, do not turn
the power back on. Shutdown the system and have qualified personnel repair it.
1.
Clear the fault that caused the emergency stop.
2.
Push the “
ESC
” button on the OIT panel to reset the fault.
3.
The machine is now ready for normal operation.
Z-Slide Sensor
1.
The Z-Slide sensor should come on when the valve is in the fully down position.
Figure 30: Z-Slide Sensor
2.
Adjust the sensor if necessary.
3.
If the sensor does not come on after it has been adjusted, replace the sensor.