RUBBER ANTENNA Li-ion BATTERY PACK BATTERY CHARGER
POWER SUPPLY BELT CLIP USERS’MANUAL
CHARGING THE BATTERY PACK
The battery pack is not charged at the factory; charge it before use.
Initially charging the battery pack after purchase or extended storage will not
bring the battery pack to its normal operating capacity. After repeating the
charge/discharge cycle two or three times, the capacity will increase to best
status. You should charge or change the battery pack if the battery’s power is
weak.
CAUTION
》
Use the original battery pack only. It is likely to explode or hurt your body if
you use other battery.
》
Don’t short-circuit the terminals or put it in fire. Don’t attempt to open the unit.
》
The ambient temperature should be between 0
℃
to 40
℃
while charging is in
progress. Charging beyond this range may not fully charge the battery.
》
Always switch OFF the transceiver equipped with a battery pack before
charging. Using the transceiver while charging, it will interfere with correct
charging.
》
Don’t cut off the power or take off the battery during the charging process or
else it will interfere with correct charging.
》
The battery pack life is over when its operating time decreases even though it
is fully and correctly charged. Replace the battery pack.
》
Don’t recharge the battery pack if it is already fully charged or it will short the
life of the battery.
Summary of Contents for PX-578
Page 16: ......