manualshive.com logo in svg

Puxing PX-568, Manual

Share
Download
Puxing PX-568 Manual Download Page 14

 
Under frequency/channel mode, press [FUN]+[9SET] key to enter the menu mode, 
turn the channel switch to select the thirteenth item, the screen will show “VOICE?”, 
Press [ENT] key and turn the channel switch to select “OFF/CHS/ENG”, if you select 
“OFF”, it means turn off the VOICE GUIDE function. After selection press [ENT] 
key to confirm and press[VFO/MR] to exit. 
 

FREQUENCY DIFFERENCE 

Choose the difference between transmitting frequency and receiving frequency. 
Under frequency mode, press[F] button, then press [9SEL] button. Turn the channel 
switch to fourteenth item, then “DIFFER?” will show on the screen. Press [ENT] key 
to enter setting. Turn the channel switch or use the number keys to input directly the 
frequency difference you need, for VHF the range is between 00.000-42.000(MHZ).   
For UHF the range is 00.000-80.000(MHz).Press [ENT] button to confirm and press 
[VFO/MR] key to exit. 
 

TRANSMIT/RECEIVE CTCSS/DCS   
 

Under frequency mode, press [FUN] +[4CODE] key, the screen will show 
“C-CDC?”, press [ENT] key then turn the channel switch to select 
CTCSS(OFF-254.1). Press SIDE KEY 3 to switch between CTCSS and 
DCS. DCS range is OFF-D754. Press SIDE KEY 4, you will select the 
normal (N) or inverted (I) DCS codes. 
You also can input the non-standard CTCSS and DCS by number keypad or 
programming software. 
 

RECEIVE CTCSS/DCS 
 

Under frequency mode, press [FUN]+[9SET] key to enter the menu mode, 
turn the channel switch to the sixteenth item, the screen will show 
“R-CDC?”, press [ENT] key then turn the channel switch to select 
CTCSS(OFF-254.1), press the SIDE KEY 3 you can switch between 
CTCSS and DCS. DCS range is OFF-D754. Press SIDE KEY 4, you will 
select the normal (N) or inverted (I) DCS codes. After selection, press [ENT] 
key to confirm and press [VFO/MR] key to exit. 
 

TRANSMIT CDC 

 
Under frequency mode, press [FUN]+[9SET] key to enter the menu mode, 
turn the channel switch to the seventeenth item, the screen will show 
“T-CDC?”, press[ ENT] key and turn the channel switch to select the 
CTCSS(OFF-254.1). press the SIDE KEY 3 you can switch between 
CTCSS and DCS. DCS range is OFF-D754. Press SIDE KEY 4, you will 

Summary of Contents for PX-568






















Reviews:

No comments

Brands by name

Popular brands

Load more brands