Putzmeister 210109379, Operating Instructions Manual

Page: 51 / 434

Safetyregulations
225
BP03_076_1601EN
2.10 Stationary machines
Stationary machines are generally used on a construction site for a
lengthy period. For this reason, site management should prepare the
setup site carefully. The site management must deliver the necess
ary documents in good time in order to be able to prepare the
foundations, base plates or similar on time.
When selecting the setup site, remember that the machine must be
dismantled and transported away again at the end of its use on site.
The ambient conditions may change as construction work prog
resses.
Please also observe section 2.11.1,Mobile machines, setup site.
Stationary booms can be erected on tubular columns, lattice booms
or other base structures. The base/structural elements to which the
base structure is fixed must be able to withstand the forces and mo
ments transferred via the base structure, as specified in the manu
facturer’s information. The base frame of the base structure must be
fastened in place so that it is level on the base/structural elements in
every direction. Check the documentation provided by the manufac
turer in this regard and the corresponding notes in the operating in
structions.
2.10.1 Set–up site
2.10.2 Stationary booms