Putzmeister 210109379, Operating Instructions Manual

Page: 42 / 434

Safetyregulations
216
BP03_076_1601EN
2.6 Operating Instructions, operating procedures and other regulations
Personnel that are authorised to work on the machine must have
read the Operating Instructions before working with the machine,
particularly the section Safety Regulations and the Safety Manual.
Reading the instructions after work has begun is too late. This
applies especially to persons working only occasionally on the ma
chine, e.g. during setting up or maintenance.
The Operating Instructions and check book must always be kept to
hand at the site of use of the machine (in the tool compartment or
container provided for this purpose).
As the operator, you must always make sure that the Operating In
structions are available. Have personnel working on the machine
confirm in writing their knowledge, understanding and application of
the Operating Instructions and Safety Regulations and Safety Man
ual. At regular intervals of at least once a year, check that personnel
are conscious of safety and the hazards involved in their work and
are taking account of the Operating Instructions.
Personnel entrusted with work on the machine must observe all
safety instructions and hazard warnings, and must be familiar with
the machine itself. You must practice all the operating procedures
described in the Safety Manual (extending the supports, operating
the placing boom, shifting the placing boom into the driving position,
preparing the vehicle for moving, etc.) under the supervision of a
subject expert until you are certain you can execute them safely. Ask
questions if there is something you have not understood. Begin oper
ating the machine only once you are familiar with the layout and sig
nificance of all the control and monitoring devices and the function
ing of the machine in general.
2.6.1 Operating Instruc-
tions