1988-1998 CHEVY/GMC (2 & 4 DOOR) #90012/#90013
LIQUID SOLID BILLET DOOR HANDLE INSTRUCTION SHEET
Congratulations on your purchase of a high quality PUTCO product. Should you need any application or technical
assistance, feel free to call us at:
1-800-247-3974 Monday
-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time)
Contact your PUTCO dealer for other quality accessories.
PUTCO Inc. - 216 West First Street - Story City, Iowa 50248
P
LEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION AND TO CHECK TO SEE THAT ALL PARTS ARE INCLUDED
.
The installation of the replacement door handles are for persons with
advanced auto-body skills and it is recommended to have them
professionally installed.
Kit Contents
Item #
Quantity
Reqd.
Description
1
2
Door Handles w/keyholes
2
2
Door Handles w/o keyholes
Recommended Tools
Safety Tools
Eye Protection
Special Tools
Pull Handle Removal Tool to remove window
crank
Installation Tools
Flat Head Screw Driver
Philips Screw Driver
Pliers
Needle Nose Pliers
10mm Socket
Ratchet
Ratchet Extensions
Alan Wrenches
Fig. B-1
A. Pre-installation Preparation
Step 1:
Verify kit contents.
Step 2:
Remove protective wrapping from inserts and place on
a non-abrasive surface.
Step 3:
Remove the door handles from the box.
Fig. B-2
STOP
B. Remove Door Paneling
Step 1:
Use the pull handle removal tool to remove the crank handle on manual windows only. You
need to slide the tool between the crank handle and the black gasket to pop the C-clamp off. The
C-clamp is shown in figure B-1. If you have power windows you will need to disconnect the wires.
Step 2
:
Remove the two Philips head screws from the inside armrest. (Fig. B-2)
