PURSUIT 2665 DENALI, Owner'S Manual

Page: 41 / 137

2665 DENALI
41
Chapter 4:
ELECTRICAL SYSTEM
4.1 General
Your Denali is equipped with a 12-volt D.C. electrical system that draws current from onboard
batteries.
The 12-volt batteries in your boat are the lead-acid type. They will require maintenance similar to
those found in automobiles. The batteries are located in a compartment in the front of the helm seat
module.
There are electrical schematics included in this manual to aid in following an individual circuit of
the boat.
PROPER FUSE OR BREAKER PROTECTION MUST BE PROVIDED FOR ALL 12-VOLT
EQUIPMENT ADDED. DO NOT OVERLOAD THE ACCESSORY CIRCUIT BREAKERS
OR OTHER CIRCUITRY THROUGH ADDITIONAL 12-VOLT EQUIPMENT.
4.2 Batteries
Pursuit electrical systems are designed to use lead-acid type batteries. Your boat has provision for
two batteries. These batteries should be of the size and capacity recommended by the manufacturer
of your engine. See the engine owner's manual. These specifications should be considered to be
the minimum size battery required. Consider increasing the capacity of the battery if you will be
trolling, drift fishing or have extensive electronics on board. Larger batteries will give you
additional capacity to operate the livewell, washdown, and electronics at low speed when the
charging system output of the engine is minimal.