1. ‘Jaws’ Section
2. Wheel Hub Cover Arm
3. Male Lock Portion
4. Female Lock Portion
5. Hex Tool
6. Lock Cap
7. Wheel Hub Arm Hex Bolt
8. ‘Jaws’ Section Hex Bolt
9. Key (x2)
1
2
Parts Identification
Installation
A. Using the hex tool (5), unscrew the
hinge bolt (8) anti-clockwise to open the
‘jaws’ (1).
TIP: When fitting to alloy wheels it may be prudent to
use sort form of padding to protect the wheel from being
scratched.
3
B. Check that the ‘jaws’ open enough to fit around the
tyre and then fit the ‘jaw’ section around the wheel.
C. Once the optimum jaw position has been established,
the jaws need to be closed by using the hex tool to turn
the hinge bolt clockwise. Use the hex tool to achieve a
secure fixing.
A
B
C
Always fit the
supplied locking
wheel nut & use
in accordance
to the supplied
instructions.
NOTE: The tips of the ‘jaws’ should be fitted into the wheel as
far as possible. A little experimentation will be required to ensure
a secure fit for your application.
4
5
6
8
7
9
