The FullStop® Saracen hitch lock can be fitted when your vehicle is hitched or
unhitched.
Insert key (5) into Male Lock Portion (3), push and turn 90° clockwise to unlock.
If stabiliser is fitted, lift handle to vertical position.
Position the Main Body (1) over the hitch handle ensuring the handle end is
recessed fully into the enclosed end of the Main Body (1). Fit the Base Section
(2) onto the bottom of the Main Body ensuring the holes line up with each other.
Slide the Female Lock Portion (4) through all the holes.
Insert the Male Lock Portion (3) into the Female Lock Portion (4) and turn 90°
anti-clockwise to lock.
Fit the protective Lock Cap (7).
If stabiliser is fitted its handle may be pushed back down into position over the
hitch lock.
Note: It is against UK law to tow a trailer or caravan with a hitch lock fitted.
Installation of the Saracen hitch lock when fitting onto an unhitched caravan,
is identical except that the included Security Ball (6) must be inserted into your
coupling to inhibit the caravan to be hitched onto a vehicle.
It is highly recommended that a secondary security device (such as a wheel
clamp) should be used to inhibit theft by some unconventional form of towing.
Visit www.purpleline.co.uk for details of other products in the Fullstop Security
range
Fit protective cap to lock barrel to help prevent ingress of dirt or water.
Thereafter spray the outside of the lock body with a light oil such as WD-40 or
equivalent every sixteen weeks.
Parts Identification
1. Main Body
2. Base Section
3. Male Lock Portion
4. Female Lock Portion
5. Key (x2)
6. Security Ball
7. Lock Cap
2
3
1
4
5
6
7
Please store your keys in a safe place and
remember to return your fully completed
registration card. Your key number is located on
both of the keys supplied and will be required in
order to purchase replacement keys.
LYF009-014
WEIGHT:
A4
SHEET 1 OF 1
SCALE:1:1
DWG NO.
TITLE:
REVISION
DO NOT SCALE DRAWING
MATERIAL:
DATE
SIGNATURE
NAME
DEBUR AND
BREAK SHARP
EDGES
FINISH:
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
