Purkeys SafeFreight, Installation Manual

Page: 8 / 24

6
LED/IGNITION INSTALLATION
Step 1: Locate a spot on the
dashboard of the vehicle where the
driver can see the LED, but not be
distracted by it while driving. Drill
an appropriate hole to place the
LED.
Step 3: Identify a good ignition source by identifying a wire that gets power
AFTER the vehicle key is placed in ignition/on position.
Step 4: Splice the wire labeled Ignition from the main harness to the wire
found from previous step.
Installation Complete.
Yellow ignition wire spliced into ignition switch.
Step 2: Plug the LED wires into the
connector as shown.
A - Green
B - Black
C - Red