User Manual
PT-SP-HD24DA
17
7.
Firmware Upgrade
Please follow the below steps to upgrade firmware by the Micro-USB port:
1)
Connect the splitter to the PC with USB cable.
2)
Power on the splitter, and then the PC will automatically detect a U-disk named
of “BOOTDISK”.
3)
Double-click to open the U-disk, a file named of “READY.TXT” will be showed.
4)
Directly copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk.
5)
Reopen the U-disk to check the filename “READY.TXT” whether automatically
becomes “SUCCESS.TXT”, if yes, the firmware was upgraded successfully,
otherwise, the firmware upgrade is fail, the name of upgrade file (.bin) should be
confirm again, and then follow the above steps to upgrade again.
6)
Remove the USB cable after firmware upgrade.
8.
Panel Drawing
FW
L.RES
H.RES
PRESET
EDID
1
2
3
4
IN 2
IN 1
SOURCE
AUTO
AUTO/3s
DISPLAY ON
DISPLAY OFF
MUTE/3s
ON
OFF
1
0
232.0mm
2
0
.0
m
m
1
0
0
.0
m
m
2x4
Splitter
4K (60Hz 4:4:4) with Downscaling
& Audio De-embedding
PT-SP-HD24DA