User Manual
PT-SP-HD12D
5
#
Resolution
Refresh
Color Space
Downscale
1080P Specs
5
3840x2160
30
4:2:0
Support
1080P@30Hz 4:2:0
6
3840x2160
24
4:2:0
Support
1080P@24Hz 4:2:0
7
3840x2160
60
4:2:2
Not Support
N/A
8
3840x2160
30
4:2:2
Not Support
N/A
9
3840x2160
24
4:2:2
Not Support
N/A
Firmware Upgrade
Please follow the below steps to upgrade firmware by the Micro-USB port:
1)
Connect the splitter to the PC with USB cable.
2)
Power on the splitter, and then the PC will automatically detect a U-disk named
of “BOOTDISK”.
3)
Double-click to open the U-disk, a file named of “READY.TXT” will be showed.
4)
Copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk directly.
5)
If the filename “READY.TXT” automatically turns to “SUCCESS.TXT”, the firmware
was upgraded successfully. If the firmware upgrade failed, please check the file
(.bin) and then follow the above procedure to operate again.
6)
Remove the USB cable after firmware upgrade.
System Connection
The following diagram illustrates the typical input and output connection of the
splitter:
1
2
IN
4K/60 Blu-ray
1080p Display
4K/60 Display
Down Scaling
4K@60 4:4:4 HDR
4K/60 Display
