PureTools PT-SP-HD116DA, User Manual

Page: 19 / 24

User Manual
PT-SP-HD116DA
18
6.2.2
Setting Commands
Command Description
Command Example and
Feedback
>SetUpdateEdid
Upload user-defined EDID. The EDID DIP
switch must be set as “1111”.
<User edid ready,Please send
edid data in 10s.
<SetUpdateEdid_True/False
/
<Time out to send edid
>SetInPortEdid [Param]
Set the EDID to [Param].
[
Param]=0~7.
0 - BYPASS
1 - 1920x1080@60 8bit Stereo
2 - 1920x1080@60 8bit High Definition
Audio
3 - 3840x2160@30Hz 8bit Stereo Audio
4 - 3840x2160@30Hz Deep Color High
Definition Audio
5 - 3840x2160@60Hz Deep Color Stereo
Audio
6 - 3840x2160@60Hz Deep Color HDR
LPCM 6CH
7 - USER EDID
The EDID DIP switch should be set as
“1111”.
>SetInPortEdid 0
<InPortEdid 0
>GetInPortEdid Get the EDID. <InPortEdid 0
>SetHdcpActiveMode
[Param]
Set the HDCP active mode.
[Param]= Src, Sink
Src - Active by Src. Follow source.
Sink - Active by Sink. Follow display.
Note:
The EDID switch must be switched to
“1111” before sending the command.
>SetHdcpActiveMode Src
<HdcpActiveMode Src
>GetHdcpActiveMode Get the HDCP active mode. <HdcpActiveMode Src
>SetVideoOutput Enable or disable video output. >SetVideoOutput 1,EN