PureTools PT-HDBT-210, User Manual

Page: 6 / 20

User Manual
PT-HDBT-210
5
Packing List

1x PT-HDBT-210-TX Transmitter

1x PT-HDBT-210-RX Receiver

2x TX Mounting Ears with 4 Screws

2x RX Mounting Ears with 4 Screws

4x TX Plastic Cushions

4x RX Plastic Cushions

1x 3-pin Terminal Block

1x Power Adapter (24V DC 1.25A)

1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.
Transmitter Panel Description
1. Power LED: The LED illuminates red when power is applied.
2. Test Pattern: Press the button with a paper clip or another pointy tool to enable
test patterns - The left LED illuminates blue and the product generates an
image of 1080p/60Hz (color bars) as output signal. Press this button again and
the left LED blinks blue at an interval of 500ms while the product generates a
4K@60Hz (4:4:4) color bar test pattern to be output. Press and hold this button
for three seconds to exit the test pattern mode.
3. 1080p
→
4K Upscaling: Press and hold the button at least three seconds with
paper clip or other sharp tool to enable 1080P to 4K up-scaling, and then the
left LED illuminates blue. Press and hold it again to exit.
4. EDID: 4-pin DIP switch for EDID setting and HDCP mode selection. Please refer
to the chapter
EDID Management
for more details.
Tx Rx
LINK HDCP
1 2 3 4 5 6
7
8 9 10 11 12
HDBT Out HDMI In IR Out IR In ARC Audio Out