background image

13 

TSI / TSI-MP Series Water Filtration Housings

Replacement Guide

You can obtain replacements from your local Puretec dealer. To maintain performance, 

warranty and standards use genuine Puretec replacements.

To maintain the high quality of the purified water the cartridge need changing every 
6 - 12 months, dependent on water quality and usage. You can obtain replacement 

cartridges from your local Puretec stockist. To maintain performance and warranty use 
genuine Puretec replacements.

The following tables provide a guide to what filter cartridge can be used in your housing:

Cartridge Installation / Replacement

To change the filter cartridge please adhere to the following procedure:
1   Turn water supply off and relieve pressure by opening a downstream tap or 

opening up the vent valve.

        Caution:

 Never remove or loosen closure bolts before relieving the pressure. 

Failing to release the pressure could cause personal injury or damage to 
equipment.

2   Loosen the key and remove the clamp. 

Model Code

Dirt, Rust, Sediment 
(Mains Water)

Taste, Odour Removal 

(Mains Water)

Dirt, Rust, Sediment 
(Rainwater)

Taste, Odour Removal 

(Rainwater)

TSI-25MP1

PX05MP1

CB10MP1

PL05MP1

DP10MP1

TSI-25MP2

PX05MP2

CB10MP2

PL05MP2

DP10MP2

Model Code

Dirt, Rust, Sediment 
(Mains Water)

Taste, Odour Removal 

(Mains Water)

Dirt, Rust, Sediment 
(Rainwater)

Taste, Odour Removal 

(Rainwater)

TSI-151     
TSI-201     
TSI-251

PX051

GC051

PL051

DP101

TSI-252

PX052

GC202

PL052

DP102

TSI Housings

TSI-MP Housings

Replacement Guide

Summary of Contents for TS1-201

















Reviews: