8
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2020
Installation
Installation
Installation must be carried out by a qualified tradesperson, in compliance with all local
laws.
The plumbing system in which the filter is installed and the installation of the filter itself
must be carried out in compliance with local laws.
Puretec is not responsible for damages to property or persons resulting from the
incorrect installation of the filter and/or the installation of the filter in a system not
complying with the local laws.
All materials used for the construction of water distribution systems for human
consumption must comply with local laws. The construction and modification of a water
distribution system intended for human consumption requires modifications to be carried
out in such a way as not to jeopardise the hygiene of the system.
After its construction or modification, a water distribution system intended for human
consumption has to be washed and disinfected according to the requirements of local
law.
The filter must not be installed between the boiler and the safety devices.
A non-return valve should be installed in conjunction with this product, along with a by-
pass valve for untreated water.
Ensure there is an appropriate point for drainage.
Prevent solvents, oils, greases, acidic or caustic substances and detergents from coming
into contact with the external plastic and brass parts of the equipment.
In case of damage during transport or assembly, do not install the equipment.
If the system is subject to water hammering, install an appropriate damping system. If
the water pressure can exceed the maximum operating pressure of the filter even for
short periods, install a pressure limiting device.
Avoid overhead installation in order to prevent damages to property or
persons in the event ofa fall, a collapse or water leakages.
