background image

FP / MP Series Water Filtration Housings

Warranty

Notes 

Puretec water care products are designed, manufactured and supported by Puretec Pty Ltd the name you can 

trust for viable and proven water solutions. The complete range of Puretec products are developed, refined, made 
to meet and exceed stringent specifications for the worldwide market.

Important: Sales of products are subject to our Terms and Conditions which are available upon request. All 
specifications, information and photos are a guide only and are subject to change without notice. Please ring 
to confirm details. Warning: For correct operation of this appliance it is essential to observe manufacturer’s 

instructions. 

Warranty

Any claim under this warranty must be made within 10 years of the date of purchase of the product. This product 
is warranted to be free of defect of material and workmanship for 10 years from date of purchase. 10 year 
warranty is 1 year parts and labour, plus 9 years parts only.

To make a claim under the warranty, take the product and proof of purchase to place where you purchased the 
product, and they will lodge a Warranty Request with Puretec.

Puretec will pay your reasonable, direct expenses of claiming under this warranty. You may submit details and 

proof of your expense claim to place of purchase for consideration.

The warranty only applies if the product was used and/or installed in accordance with the user guide and/or 
installation instructions. This warranty is given in lieu of all other express or implied warranties and manufacturer 
shall in no circumstance be held liable for damages consequential or otherwise or delays caused or faulty 
manufacturing except as excluded by law.

Applicable to all above, is that the Warranties need to be approved by Puretec to ensure product was not 

incorrectly used, installed or claimed. False and incorrect claims will be pursued at Puretec’s discretion, including 
chargeable inspection and labour costs incurred.

All installation and service work should be completed by qualified tradespeople. Faulty operation due to 

unqualified persons will result in voided warranty coverage. 

Use PTFE thread seal tape on all connections. Use of liquid pipe sealant/dope will void warranty.

Warranty/Australia

This warranty is given by Puretec Pty Ltd, ABN 44 164 806 688, 37-43 Brodie Road, Lonsdale SA 5160, telephone 
no. 1300 140 140 and email at [email protected].

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with 
guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or 
refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also 

entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does 

not amount to a major failure. 

Warranty/New Zealand

This warranty is given by Puretec Ltd, Reg. No 4464398, PO Box 875 Cambridge 3450 NZ, telephone no. 0800 
130 140 and email at [email protected].

This warranty is provided in addition to other rights and remedies you have under law: Our goods come with 
guarantees which cannot be excluded under the Consumer Guarantees Act. You are entitled to replacement or 
refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also 

entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does 

not amount to a major failure. 

Summary of Contents for FP Series









Reviews: