03
P
U
R
E
-P
R
O
R
E
V
E
R
S
E
O
S
M
O
S
IS
S
Y
S
T
E
M
12
P
U
R
E
-P
R
O
R
E
V
E
R
S
E
O
S
M
O
S
IS
S
Y
S
T
E
M
PRO
P
URE
DRINKING WATER S YS TEM
Components & Selected filters
Water storage tank
Deliver-valve
Water supply connector
Drain saddle
Tank ball shut-off valve
Tubing
¨
Selected filters
¨
Components
Infra-red cartridge filter
PRO
P
URE
DRINKING WATER S YS TEM
T.
D.
S
UVC-LIGHTING
ULTRAVIOLET WATER STERILIZER
Mineral cartridge filter
UV water sterilizer
TDS meter
Infra-Red
Mineral
European ceramic faucet
ROYAL Reverse Osmosis Drinking Water Systems
ROYAL Reverse Osmosis Drinking Water Systems
A.With everything connected, turn on the water check for leaks.
B.Make sure the storage tank shut-off valve is "OFF". Open the sink
top faucet.
C.Within a few minutes (up to 15) the water will start to run from the
faucet slowly.
D.Let the water run for at least 30 minutes. This flushes the carbon
filters on first time use.
E.After initial flushing, open the shut-off valve on the tank and close
the sink top faucet.
F.Tank will now full of water (usually 2 to 3 hours) after the tank has
filled. Open the sink top faucet and drain all water until the storage
tank is empty and there is only a small flow from the sink top
faucet.*** DO NOT USE FIRST TANK OF WATER.***
G.Close the sink top faucet. The system is now ready for use.
H.Change filters regularly every 6 to 12 months and have the
membrane checked annually.
Caution
0
1.Do not use hot water (over 45 C)!
2.Do not freeze the machine!
3.Switch off electricity and water source if away for more than 5 days,
and drain out pure water.
Operation regulation
