PureMate
TM
5
PM 906 Digital Ultrasonic Humidifier
OPERATING INSTRUCTIONS
Before getting started, please remove the PM 906 from its box and allow it to become accustomed to the room temperature for at least
30 minutes especially if the machine is cold from the outside air. The PM 906 is designed to operate at temperatures between 5-
40 ºC
and relative humidity of less than 80%.
Operation steps:
Take the water tank out of the unit, open the water tank cover, and fill the tank with clear water. Close the cover, and put the tank onto
the base unit carefully.
Put the nozzle into the socket on top of the water tank.
Connect the main supply, switch on the unit (NEVER RUN THE UNIT WHEN THERE IS NO WATER IN WATER BASIN), the main
connection lamp will be on. The unit starts working.
1.
Put the machine on a flat surface.
2.
Fill the water into the water tank, and then tighten the tank cover.
3.
Put the water tank on the main body.
4.
Check if the rated voltage meets the input voltage, and plug in the socket.
5.
Switch on the machine; the background light of LCD will be on. The machine begins to work.
6.
Touch the symbol “MAX-MIN”, you may adjust the mist volume. On the remote control, just press the button of “MIST
VOLUME”
.
7.
Touch the symbol “ION”, the Negative ion generator works. On the LCD display, it shows the shape of trees.
Touch again to stop the function.
8.
Touch the symbol “HEATING”, the warm mist will come out after 10 minutes. On the LCD display, it shows the shape
of
fire. Touch again to stop the function. Mist will become cool.
9. Constant humidity:
Before you touch the symbol “HUMIDITY”, LCD display shows the current humidity. You may set the
humidity arranged from 45%RH to 90%RH. Press once, it will increase by 5%RH . When it reaches 90%RH, press again, it
will go back to 45%RH. After you set the expected humidity, the machine will keep the memory after 5 seconds . 5 seconds
later , LCD display shows the current humidity. If the expected humidity is less than the current humidity, the machine will be
in sleeping state. But if the expected humidity is higher than the current humidity, the humidify function will work.
10.
Timer setting: There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch the symbol “TIMER”, LCD display shows
the timer. The timer shows the rest operation time and decrease by 1 hours, i.e., if set the timer at 12 hours, LCD display
shows 11 after one hour.
11.
Once the water in the basin is too little to keep the machine working, the machine will automatically stop working. LCD shows
the shape of lack of water. Refill the water, and the machine will restart.
