English | 4
SPEED:
Press to choose from 3 different breeze speeds:
- High
- Medium
-Low
TIMER:
Press the timer button to activate the timer function. Each time the button is pressed
the timer will be increased by 1 hour up to a maximum of 12 hours.
SWING:
Press the swing button to activate the vertical louvres oscillation. Press again to stop
the oscillation.
COOL:
Press to activate the air cooling feature, reducing the surrounding air's temperature.
Note: The water tank must not be removed while the air cooling feature is activated.
Note: The air cooler is supplied with two ice packs, the cooling effect can last for
approximately four hours.
COOLING MODE
For the cooling mode to function, the water tanks requires filling, and the ice packs freezing
for enhanced cooling. Ensure fresh water is added to the water tank prior to every use.
- Turn off the air cooler and unplug from the power socket.
- Turn the water tank locking clip clockwise 90 degrees and gently pull the water
tank out until it stops.
- Fill the water tank with fresh water to the maximum water level.
- Carefully push the water tank back into position and turn the water tank locking
clip anti- clockwise 90 degrees to secure the tank.
- Add clean water to the ice packs and fill two-thirds of the way.
- Put the ice packs into the freezer until completely frozen.
- Open the top cover and place the frozen ice packs into the compartment for
enhanced cooling.
ICE PACKS
FILLING THE WATER TANK
- Turn off the air cooler and unplug from the power socket.
- Place the air cooler in a sink, bath tub or over a drain.
- Turn the water tank locking clip clockwise 90 degrees and gently pull the water
tank out until it stops.
- Remove the plug located in the bottom of the water tank and drain.
- Reinsert the plug into the water tank and push the water tank back into position
and turn the water tank locking clip anti-clockwise 90 degrees to secure the tank.
EMPTYING THE WATER TANK