USING THE ADHESIVE PADS
Please ensure the skin is clean before applying the adhesive pad. Do not use on any wounds. Connect the
adhesive pads to the wires heads and insert into the electrode jack. Remove the transparent protection film
from the adhesive pad, and then stick it on the corresponding position on your body, ensuring they are firmly
applied to the skin, press in) or reduce (-)button to adjust the INTENSITY to a comfortable level, The
intensity on the function display screen will change between 00 to 99.
After use, please put the adhesive pads on the storage plate and wrap the output cords around it.
The program will stop automatically when the preset time is up.
When the unit is not used, switch off and remove the plug from the electrical socket.
Tip: Machine does not operate on the feet and body both at the same time.
Q. What is EMS and how does it really work?
A: When exercising, your muscles receive small electrical signals via nerve endings to stimulate a contrac-
tion. Once a muscle has contracted and the nerve is no longer sending a signal, the muscle relaxes. EMS
mimics these signals repeatedly to reproduce the muscle contractions of physical exercise.
Q: Why can't I feel anything?
A.Both feet have to be place on the machine without any socks.
Q, Will I find it uncomfortable?
A. At low intensity you will feel a slight sensation. As intensity is increased, you will feel the tingling sensation
decrease and the muscle contractions increase. Individuals have different tolerance levels of comfort, it is
important that you find the level most suited to you.
Q. Why are my legs sore after treatment?
A. The chances are you have set the intensity level too high and you muscles are being overworked. Next
time select a lower intensity level and ensure you leave enough time between sessions, allowing your mus-
cles time to recover.
FAQS:
English | 6