PureMate PM 412 Instruction Manual Download Page 4

POWER BUTTON: Press to turn ON/OFF the dehumidifier.

MODE BUTTON: Press to choose between:

Auto Dehumidifying 

Continuous Dehumidifying (dry clothes function).

HUMIDITY SETTING BUTTON: When in Auto Dehumidifying mode, press 
to set the desired relative humidity level. The humidity range is from 30% to 
80%, increasing in 5% increments. The dehumidifier will turn off when the 
room reaches this target RH%  

FAN BUTTON: Press to select between Low Fan and High Fan speeds.
 
INTERNAL DRYING FUNCTION: Press to start the internal drying mode. 
The units compressor will stop collecting water, the fan will run on high 
speed for 30 minutes, then on low speed for 20 minutes. This is to dry the 
dehumidifier ready for storage.

NOTE: Before storing the dehumidifier ALWAYS ensure the internal 
drying function has been completed.

TIMER BUTTON: Set the Timer to turn the unit on or off, between 1-24 
hours.

Set the Dehumidifier to turn ON:
    - When the dehumidifier is in Stand-by, press the timer button.
    - Press the timer button to select the desired time, between 1-24 hours,   
      until turn on.
    - The time displayed will flash 5 times to confirm the timer is set. The  
      display will show the remaining time till turn on.
    - Select the desired mode and/or humidity settings before turn on.

Set the dehumidifier to turn OFF:
    - Press the power button to turn on the dehumidifier.
    - Select the desired mode and/or humidity settings.
    - Press the timer button.
    - Press the timer button to select the desired time, between 1-24 hours,   
       until turn off.
    - The time displayed will flash 5 times to confirm the timer is set. The 
      display will return to show the current humidity level.
    - To view the remaining time before turn off, press the timer button.

English | 3

Reviews: