- Find an ideal location for your appliance: Do not place the sanitizer directly next to
a heating vent, or near any heated place, or near any places close to water.
- The sanitizer should be placed in an elevated position at least 3 ft off the floor.
- Read the instructions below for “Wall Hanging Procedure” if you want to hang your
appliance on the wall.
- Confirm all screws of the appliance to be screwed tightly and in the right position.
- Connect the unit only to alternating current with voltage according to the rating
label. The cable is one meter long, always connect the sanitizer and the adapter
within this distance.
- Ensure that the cable is not pinched anywhere. Do not operate the sanitizer if the
cable is damaged.
- Upon discovering damage of lighting bulb or UV-C tube, please do not operate
the sanitizer. Kindly contact Sino Group customer service center for replacement in
order to prevent short circuit.
- Do not attempt to replace UV-C tubc, the UV-C tube only can be replaced by
the same model from original manfacturer, contact Sino group customer service
center for replacement.
Wall mounting
P.9
1) Always turn off the safety sensor switch if you want
to hang your sanitzer on to the wall.
2) Drill two hole into the wall. Make sure the holes
drilled are leveled.
3) Insert the plastic screw into the wall using a hammer.
4) Insert the screw into the plastic screw, leaving 5 mm
outside the wall.
5) Turn off the safety sensor switch if hanged.
6) Hang the appliance onto the wall.
7) Ensure the appliance is leveled.