PureLink by Dtrovision
4
1.3 Product Features
Allows continuous EDID handshake with single link DVI and Dual link DVI source
SE-DDL automatically manages EDID handshake between connected devices
Built-in rotary switch to support up to 15 total EDIDs including 12 default EDID and 3 empty
positions for user emulation
Support default, emulation, and bypass mode
Built-in equalizer for reliable signal quality performance
Can be powered directly from the DVI source or with an optional power supply
Support both DVI single link and DVI dual link
Support resolution up to 3840 x 2400 @30Hz
Plug and play
1.4 What
’s in the Box
1) SE-DDL
2) Micro USB to DC jack cable
3) User Manual
1.5 Installation
* Important: Please use the installation procedure below.
Improper or no operation may result if the start-up sequence is not correctly followed.
Step 1
Provide power to the SE-DDL via one of the options.
A) Connect DVI cable between DVI source and DVI Input of SE-DDL (when the source provide 5V)
B) Plug 5V power adapter
Then, ensures the power LED is on
Step 2
For EDID selection, there are 3 ways to set EDID. Bypass, Factory default, and Emulation.
Bypass
: This mode enables the source to communicate EDID directly from the connected display
Factory default
: This mode, user can select EDID from 13 factory pre-programmed EDID.
See below chart for EDID information. After making an EDID selection using rotary dial, press SAVE
button for half seconds for selected EDID to be applied.
Emulation
: This mode, user can emulate EDID from the display.
There are 3 positions on the rotary dial for user custom emulation. For EDID emulation programming,
connected the powered SE-DDL
’s DVI output to the display, not to the PC.
When the power is connected, turn rotary to any of 1 ~ 3, then press SAVE button next to the rotary
dial for 3 seconds, then release. EDID LED will blink few times during EDID emulation process.
Press save button for about half second for selected EDID to be applied.
