FCC/CE Statement
This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must not accept any interference received, including interference
that may cause undesired operation. This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 and 2 of FCC Rules and EN
55022/55024/61000-3 for CE certification. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and. if not installed and
used in accordance with the instruction guide, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult a service representative for help.
Properly shielded and grounded cables and connectors must be used in order to comply with
FCC/CE emission limits. Changes or modifications not expressly approved by the party responsible
for compliance could void the user s authority to operate the equipment.
UL Statement
This device has completed a UL Commercial Inspection and Testing Services for the multimode
HDMI cable complied with VW-1 under UL 758. it is validated by the UL file number SV2038 and
project number 04CA05353.
