PureLink by Dtrovision
21
The characters and numbers in a Disconnect command tell the system which input or output to
disconnect. The “D” key initiates a Disconnect command for routing a switch. The characters and
numbers that follow the “D” command tell the system that inputs and outputs to disconnect. The last
character “!” is found at the end of the Command code, which tells the system to execute the
command.
For example, the command code
*255DI01O00!
It can be interpreted as follows: (*) Starting the command code (255) Router ID is 255 (D) Disconnect on (I01)
Input 01 to (O00) Output 00 (!) take the command. For a complete list of command characters and their
functions, see the command list below
1. Enter the Disconnect command below. Replace the “#”s with the input and output number(s).
*255DI#O#!
Examples (Disconnect) :
Command Codes
Action
*255DI01O00!
Disconnect Input 1 to no Output (00)
*255DI00O01,02,03!
Disconnects Outputs 1, 2, and 3
*255DI00O01-03!
Disconnects output 1,2, and 3
*255DALLIO!
Disconnects all inputs and outputs
HDMI Output Audio Select Command
SA : HDMI source audio
B1: Balanced IN1 , B2: Balanced IN2 , B3: Balanced IN3 , B4: Balanced IN4
S0 or B0 or MU : Not connected (Mute)
Command Codes
Action
*255HAALLSA!
ALL HDMI output connect embedded audio
*255HAO01SA,O02B1!
Connect audio hdmi Output 1 from HDMI Source Audio and balanced input 1 to output 2
*255HAO01SA,O02SA,O03B4!
Connect audio hdmi output 1 from HDMI Source Audio,hdmi output 2 from HDMI Source
Audio, and balanced input 4 to output 3
*255HAO01-04B3!
Connect audio balanced input 3 to output 1, 2, 3, and 4
*255HAO01B0!
Mute audio to output 1
Analog Audio Matrix Switcher
’s Output Audio Select Command
Examples (Connect
Balanced Audio out
):
S1-S6 : HDMI input
B1: Balanced IN1 , B2: Balanced IN2 , B3: Balanced IN3 , B4: Balanced IN4
S0 or B0 or MU: Not connected (Mute)
