User Manual
IPAV Pro Series
70
6.
Troubleshooting & Maintenance
1)
If the IPAV Pro Control Center does not detect any Transmitters/Receivers, please
make sure:
Whether the IP address is configured correctly. Please ensure the IP of the
connected control PC is set to the same network segment as the TX / RX.
Whether there is an IP address conflict with another device in the same
network. Please make sure, each device has a different IP address in the same
LAN.
Power supply is normal and as specified.
The connection cables are of high-quality and the link has been established
successfully.
2)
If the IPAV Pro Control Center detects the connected TX / RX units correctly,
please confirm whether the video source is selected correctly and that the
connection cable functions as specified.
Note:
If your problem still remains after following the troubleshooting steps above,
please contact your local dealer or distributor for further assistance.
