Video Connection
1.
Connect your video source’s HDMI output port to the HD-2100’s HDMI input
port using standard HDMI cables(not included). Make sure all your HDMI
source and the displays are turned off before connecting the cables.
2.
Connect your HDMI display’s HDMI input port to HD-2100’s HDMI output port.
Make sure your HDMI display is turned off before connecting the cables.
3.
Plug the 12V power supply into the switch’s power input port.
4.
Plug the 12V wall mount power supply into the wall outlet.
5.
Turn on power switch
6.
Turn on your displays.
7.
Turn on your video source.
External EDID and Internal EDID Set up
A.
External EDID Set up
i.
Unplug all HDMI cables.
ii.
Connect Monitor or HDTV to “
OUTPUT 1
” on the back of the HD-2100
iii.
Turn on the HD-2100 and HDTV
iv.
Press and hold “EXTERNAL EDID” button on the front of the HD-2100
for 3 seconds until RED LED light is on.
v.
Turn off HD-2100
vi.
Reconnect all device following above “
Video Connection
”
B.
Internal EDID Set up (Factory Default Setting)
i.
Unplug all HDMI cables
ii.
Turn on HD-2100
iii.
Press ”INTERNAL EDID” button on the front of the HD-2100 for 3 sec
until RED LED light is on.
iv.
Turn off HD-2100
v.
Reconnect all device following above “
Video Connection
”
** What is EDID?
E
xtended
D
isplay
I
dentification
D
ata is a VESA standard data format that contains basic information about a display
and its capabilities, including vendor information, maximum resolution, color characteristics, factory pre-set timings,
frequency range limits, and character strings for the monitor name and serial number
