PureLink FX1010, Instruction Manual

Page: 10 / 16

-10-
11. MAINTENANCE
There are no components located inside the product you need to maintain� Never open/dismantle
the product. Maintenance, modifications and repairs are to be performed exclusively by an expert or
at a qualified shop. If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel�
12. CLEANING
Do not clean the LC connection without using appropriate fiber cleaning equipment such as
a One-Click-Cleaner. Using any other type of cleaning product is liable to damage the fiber port
beyond repair�
Before cleaning the product it must be disconnected from all other connected products� Ensure the
dust cap is always replaced when not connected to an LC cable�
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing or cause malfunctions� Be sure not to get cleaning products or sovents
in or around the the fiber port, even when the dust cap is in place.
To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure to the
housing as this may cause scratch marks�
You can easily remove dust using a long-haired, soft and clean brush�
13. WARRANTY AND LIABILITY
PureLink warrants this product to be in good working order for a period of one year from the date of
purchase� The manufacturer guarantees full statutory warranty terms on the device only, as the ma-
nufacturer has no influence on installation, warranty only applies to the product itself.
If any fault or damage is detected on your product, please contact your dealer and provide your
sales slip or invoice as evidence of the purchase, if necessary� Your dealer will repair the fault either
on site, or send the device to the manufacturer� You make the work of our technicians considerably
easier, describing possible faults in detail – only then you can be assured that faults, occurring only
rarely, will be found and repaired with certainty!
The manufacturer is not liable for damages to persons or property caused by improper installation,
operation or maintenance, not described in this manual�
Do not alter or modify the product or its accessories�
Any use other than described in this user`s manual is not permitted and causes loss of warranty, loss
of guarantee, and non-liability�